Global Crystals Blog

Know at least 3 Techniques using Crystals that involve working on the Chakras.

Technique 1

This is also known as a basic Chakra balancing using crystals.

1. Cleanse all the crystals that you are about to use. For this balancing you will require eight stones. Black tourmaline, Carnelian, Citrine, Green Quartz, Rose Quarta, Sodalite, Amethyst and Clear Quartz tumble stones.
2. Ask your client to lie face up on the therapy couch. Let your client know what the procedure is and use language and any other techniques at your disposal to ease the client into the most relaxed state.
3. Begin placing the crystals upon the chakras. Always start with the root chakra and work up towards the crown chakra. This is a very simple layout, more complex stone selection can also be used.
4. Pay close attention to you client during the whole process. You be inclined to remove some of the stones more quickly than you had anticipated. You can monitor your client by observing breathing rate, eye movement, skin colour, temperature, swallowing, level of stillness and of course by the feeling in the room during the process.
5. After the allotted time, antwhere from 5 to 60 minutes, begin to remove the crystals one by one. Always start fro the Crown and work down towards the Root chakra.
6. Allow your client ample time to integrate the energies from the treatment, this can be up to the same amount of time that the treatment took.
7. Once you have completed the balancing seal in the clients energy by using a quartz point in your right hand and going round your client at least three times.
8. Allow the client to come back to full consciousness in their own time. Ensure that they are fully grounded and then ask them to take a seat where you can continue your consultation or session.

Technique 2

This technique involves the use of a dowser is is often referred to as Dowse Pulsation.

1. Cleanse all the crystals that you are about to use. For this you will require a Clear Quartz Dowser.
2. Prepare the space and yourself. Center and balance yourself.
3. Ask your client to lie face up on the therapy couch. Let your client know what the procedure is and use language and any other techniques at your disposal to ease the client into the most relaxed state.
4. Begin to scan each of the chakras from the Root up to the Crown. During this process make a mental note of the sizes, levels, speeds, magnetism and temperatures that you notice at each chakra.
5. Now using the Dowser/Pendulum, place it over the first chakra and ask it to balance each of the chakras. If there is no movement then the chakra is most probably balanced and you can move on. If the Dowser swings Anti-clockwise then there is an excess of energy in the Chakra and the dowser is removing energy. If the Dowser swings Clockwise then there is deficit of energy and the dowser is putting energy in.
6. As the pendulum spins allow the dowser to do its work. Once the dowser has settled down and stopped moving, spinning, swaying, erratically moving or making a figure of 8, then you can move on to the next chakra.
7. Once you have worked on each of the chakras then the technique for this type of healing is complete.
8. Allow your client ample time to integrate the energies from the treatment, this can be up to the same amount of time that the treatment took.
9. Once you have completed the balancing seal in the clients energy by using a quartz point in your right hand and going round your client at least three times.
10. Allow the client to come back to full consciousness in their own time. Ensure that they are fully grounded and then ask them to take a seat where you can continue your consultation or session.

Technique 3

This technique involves a quartz point in a similar way to how we used a dowser in Technique 2.

1. Cleanse all the crystals that you are about to use. For this you will require a Clear Quartz Point or Wand.
2. Prepare the space and yourself. Center and balance yourself.
3. Ask your client to lie face up on the therapy couch. Let your client know what the procedure is and use language and any other techniques at your disposal to ease the client into the most relaxed state.
4. Begin to scan each of the chakras from the Root up to the Crown. During this process make a mental note of the sizes, levels, speeds, magnetism and temperatures that you notice at each chakra.
5. Now place your attention on the root chakra. Begin by pointing the quartz at the root chakra and intending a connection between the crystal and the chakra. Now begin to remove any unwanted or un-needed energies from this chakra by rotating the quartz in an anit-clockwise direction. When you sense/feel/intuit that all the excess and un-needed energy has been removed, you can move on to the next chakra.
6. Once you have removed the excess from each of the seven chakras then move back to the root chakra. This time make a connection between the Quartz and the Root chakra and put into the chakra any required energy by rotating the quartz point in a clockwise direction. When you feel/sense/intuit that the required energy had been added to each chakra then move onto the next.
7. Allow your client ample time to integrate the energies from the treatment, this can be up to the same amount of time that the treatment took.
8. Once you have completed the balancing seal in the clients energy by using a quartz point in your right hand and going round your client at least three times.
9. Allow the client to come back to full consciousness in their own time. Ensure that they are fully grounded and then ask them to take a seat where you can continue your consultation or session.

Each of these techniques are very simple and can be easily used in a clients first session. It is possible to create more complex sessions using grids, specific crystals and specific placements. As we grow and develop we gain a greater understanding of energetic systems, how they function and how we can best assist them to deliver the best results.